Skip to content

Comparison

The Distro alternative built for wholesale quoting

Distro’s own implementation page describes five milestones that begin with connecting your ERP, with a total time to go live of three to five weeks, and its product pages sell “Complete Platform, Not Point Solutions”. ERP Agent does one job: it turns the request in your rep’s inbox into a priced quote or sales order. It starts the same week from the catalogue file you export today, and a line such as “3/4 EMT 10ft” comes back as your own product with a 0–100 match score.

On this page

Three differences you can check before you choose

  • Real requests in the first week, before your ERP is connected. Distro’s implementation page lays out five milestones. The first is discovery and data onboarding: connect to your ERP system, ingest your full product catalog, sync customer data and configure single sign-on, in one to two weeks. Distro’s own team then tests the configuration for three to five days, three to five of your power users pilot the system for five days, and the rollout follows. The page puts the total time to go live at three to five weeks and says “We connect to your ERP, load your data, configure the AI, and validate the system before your team ever touches it.” ERP Agent starts from a catalogue file. Your company gets its own agent mailbox, reps forward real requests in the first week, and we set up the connection to your ERP during onboarding. Your IT team does not have to open ERP access before your sales team sees what the agent proposes.
  • One job, done end to end, not a platform to roll out. Distro’s product pages carry the heading “Complete Platform, Not Point Solutions” and list six products: quoting and order entry, CPQ, plan and spec takeoffs, a sales agent, a customer support agent and accounts payable. Its rollout milestone trains users by role and deploys in phases by team, branch or location, and the same page says “This isn’t a software purchase. It’s a transformation partnership.” ERP Agent does one job thoroughly, on top of the ERP you already run: it turns the customer’s request into a priced quote or sales order. Your reps forward the email they already have and review one draft. For the customers you choose, quotes the agent is sure of go straight into your ERP, where your team sends them as it does today.
  • Priced by line volume alone, with unlimited users. Distro’s pricing section names no model. It says “your pricing is built around how your team actually operates” and “Let’s talk it through and we can see what fits.” ERP Agent’s pricing is a setup fee and a monthly subscription. The monthly price is set by your line volume alone: users are unlimited, and quote requests, tenders and sales orders are always included. You receive an itemised quote before getting started. See how pricing works.

Distro vs ERP Agent, side by side

The Distro column uses Distro’s own implementation and pricing page and its quoting and order entry page.

Distro vs ERP Agent, side by side
DistroERP Agent
Your reps want to try it on real requestsMilestone three of five: three to five power users pilot the system for five days, after the ERP is connected and Distro’s own team has tested the configurationIn the first week, from a catalogue file; reps forward real requests to your agent mailbox before any integration work
First real request processedTotal time to go live: three to five weeksThe same week, from a catalogue file, while the ERP connection is set up during onboarding
Your quote desk is the bottleneck, not your whole sales floor“Complete Platform, Not Point Solutions”: six products, with users trained by role and deployed in phases by team, branch or locationOne job: the customer’s request becomes a priced quote or sales order in the ERP you already run
How it is soldNo pricing model on the site: “Let’s talk it through and we can see what fits”A setup fee and a monthly subscription set by line volume alone: unlimited users, with quote requests, tenders and sales orders included (pricing)

What your rep does with a 40-line request in ERP Agent

All of this happens in one review screen, and every step works from the keyboard.

  1. The draft fills in while you watch

    Lines appear in the table as the agent matches them. Requests with several hundred lines are split into batches that run in parallel.

  2. Go straight to the marked lines

    Every line carries a match score from 0 to 100 and the agent’s reasoning. Press N to jump to the next line under 80. The customer’s original wording sits next to the proposed product.

  3. Swap with one key

    When more than one product could fit, the line already holds up to three runner-ups from your catalogue, each with its own match score, unit price and line total. Press 1, 2 or 3 to take one, 0 to go back to the agent’s pick, or A to search that line again.

  4. Change the rest by typing

    In quote chat, type “line 4 should be the PVC body, and add 50 one-hole straps”. The agent searches your catalogue and shows each change as before and after, such as “#4 unit price $7.49 → $7.95”. Keep or reject each one. The chat cannot send anything.

  5. Send, and it learns

    Send to your ERP with “Final — send and learn”. The next time a customer writes the same thing, the agent picks the same product. Nobody writes a rule.

Example: a contractor’s request in his own words

An electrical contractor emails an electrical distributor. Prices are left out here; in a real draft they come from the customer’s terms in your ERP.

Customer requestIllustrative example
“Need pricing on the below for the Maple St job, will call Thursday.”
  1. 50 x 3/4 EMT 10ft
  2. 5 x #12 THHN str blk 500ft
  3. 3 x 30A safety switch 3P N3R fused
  4. 4 x 2in LB
  5. 100 x our # EL-3340 (same as last job)
Proposed lines · Illustrative example
Request lineProposed productQtyMatchNote
3/4 EMT 10ftEMT conduit 3/4 in, 10 ft, galvanised steel5096“EMT” read as electrical metallic tubing; trade size and length match.
#12 THHN str blk 500ftTHHN building wire 12 AWG, stranded copper, black, 500 ft spool594Gauge, stranding, colour and spool length read from the shorthand.
30A safety switch 3P N3R fusedSafety switch 30 A, 3-pole, fusible, NEMA 3R390The NEMA 1 indoor switch contradicts the stated rating and was pushed down.
2in LBConduit body type LB, 2 in, aluminium472Marked: material not stated. The PVC body is alternative 1, one keypress away.
our # EL-3340 (same as last job)EMT set-screw connector 3/4 in, steel10097The customer’s own code, learned from an earlier quote.

Illustrative example with sample products, codes and scores, showing how a draft is presented for review.

ERP Agent quote review interface with sample data
Each request line beside its proposed product and match score, with the lines that need a decision marked. Open full size

Why the product decision is the part that matters

A quote request comes down to one decision per line: which of your products the customer means when he writes shorthand, gives a size in his own format or uses his own article number. According to our case study, a sales rep spends on average 4–7 minutes per line when creating quotes and orders by hand (calculate your cost).

ERP Agent is built around that decision. It makes it for every line, shows how sure it is, and leaves your rep a one-key fix when it is wrong. Because it does this one job on top of the ERP you already run, there is nothing else to roll out: no new platform for the counter, the field and the back office to learn before the quote desk gets its time back. See how ERP Agent automates quotes.

How to test it on your own requests

You can run ERP Agent on real requests before any integration work begins.

  1. Send your catalogue

    The product file you export today is enough to start; past quotes help it learn faster. From the first request, the products proposed are your own.

  2. Forward real requests

    Your company gets its own agent mailbox. Reps forward customer requests there or paste them into the web app, and a typical request is ready for review in 3–8 minutes.

  3. Count the lines that come back right

    Include the difficult requests: long bid lists, scans, shorthand and the customer’s own part numbers. Our pilot checklist shows how to set up a fair trial.

  4. Connect your ERP

    We set up the connection to your ERP or CRM during onboarding. Reviewed quotes and orders then land in the system your team already uses.

ERP Agent in numbers

4–7 min
per line when quotes and orders are created by hand, according to our case study
Over 95%
average automation across our customers
Over 95%
accuracy in quote-line automation at LVI-WaBeK
3–8 min
for the agent to prepare a typical request

ERP Agent is live with steel, HVAC and fastener distributors. Read how LVI-WaBeK turns customer requests into quote lines with the right products and prices.

Frequently asked questions

Is ERP Agent a good Distro alternative?

Yes, for distributors who want the quote desk’s backlog gone without rolling out a sales platform. ERP Agent turns the customer’s request into a priced quote or sales order: it finds each product in your catalogue from the customer’s words, scores every line from 0 to 100 and stores up to three ranked alternatives on lines where more than one product fits. Your reps can send it real requests the same week, from a catalogue file.

Distro vs ERP Agent: what is the main difference?

Scope and start. Distro’s site sells a complete platform of six products, rolled out in five milestones that begin with connecting your ERP, with a total time to go live of three to five weeks. ERP Agent does one job on top of the ERP you already run, and starts the same week from a catalogue file while we set up your ERP connection.

How much does Distro cost, and how is ERP Agent priced?

Distro’s implementation and pricing page names no pricing model; it says pricing is built around how your team operates and invites a conversation. ERP Agent’s pricing is a setup fee and a monthly subscription. The monthly price is set by your line volume alone: users are unlimited, and quote requests, tenders and sales orders are always included. The setup scope depends on your integrations, product data and business requirements, and you receive an itemised quote before getting started. See how pricing works.

Can we try ERP Agent before our ERP is connected?

Yes. Send your product file and forward real requests to your agent mailbox, including the difficult ones. Each line comes back as one of your own products with a match score and the agent’s reasoning, so you judge the result on the products your reps would actually quote. Our pilot checklist shows how to set up a fair trial.

Does our team have to learn a new platform?

No. Reps forward the customer’s email to your company’s agent mailbox, or paste the request into the web app, and review one draft. For the customers you choose, quotes the agent is sure of go straight into your ERP, where your team sends them as it does today.

What happens when the agent picks the wrong product?

Lines under 80 are marked, and lines where more than one product fits carry up to three ranked alternatives with their price and line total. Your rep presses 1, 2 or 3 to swap, or A to search again. When the quote is sent, the agent learns the correction for the next time a customer writes the same thing. If nothing in your catalogue fits, the line goes on your placeholder code instead of a near-miss product.

Does ERP Agent work with my ERP?

Yes. ERP Agent integrates with Business Central, SAP, NetSuite, Visma, IFS, Sage and any other ERP or CRM. We set up the connection for your company during onboarding, and you can start with a catalogue file the same week. See all integrations.

Does ERP Agent work in languages other than English?

Yes. The app runs in English, Finnish, Swedish, German and Italian, and the agent matches a request in one language against a catalogue in another, for example a Finnish request against an English catalogue.

Can ERP Agent handle purchase orders as well as quote requests?

Yes. The rep chooses quote or sales order when the request comes in, and the same product identification applies. See purchase order to sales order.

Who are Distro’s main competitors?

Distro’s competitors include other quote and order automation vendors, document capture tools and the AI agents ERP vendors are adding to their own products. Our guide to AI quoting software for distributors explains what to look for.

Let’s look at your quote workflow

Bring a request from this week’s inbox

Book a call and send a few real requests, including the difficult ones. We will show you line by line what the agent proposes from your own catalogue, before any integration work.

  • Your requests and product catalogue
  • Your pricing and review process
  • A clear scope for the next step
Lauri Pelkonen

Lauri Pelkonen

Founder & CEO

Book a 30-minute call Request a demo by email

Or use the address directly