Skip to content

Bearings and power transmission

Quote automation for bearing and power transmission distributors

Quote automation for bearing and power transmission distributors turns a maintenance enquiry (bearing designations, belt and chain sizes, seals, a number copied off a worn part) into a draft quote from your own catalogue and customer pricing. ERP Agent identifies the right product for each line, keeps near-identical variants apart by the numbers on the line and scores every match from 0 to 100. A rep approves before it lands in your ERP, CRM or other system.

What does a bearing and power transmission enquiry look like?

A maintenance fitter emails from the plant floor: the conveyor is down, and the list is whatever is stamped on the parts. A stores buyer sends an Excel sheet under the plant’s own stock numbers. A machine builder forwards a bill of materials with one manufacturer’s designations, and your range is another’s.

Every line is a code where one character changes the product. 6205 with two seals or two shields, normal clearance or C3. A 22212 with a cylindrical or a tapered bore. SPA 1500 or SPA 1507. 08B-1 or 08B-2. One maker writes 2RS1, another 2RSR and a third DDU for the same pair of contact seals. The rep has to turn each line into one of your articles and price it for that customer, usually while a line is stopped.

According to our case study, a sales rep spends on average 4–7 minutes per line when creating quotes and orders by hand. A 40-line shutdown list is two and a half to nearly five hours of work, and on a breakdown the first supplier with a correct answer usually gets the order. Work out your own cost per quote.

Bearing and drive shorthand, and what the agent does with it

Bearing and drive shorthand, and what the agent does with it
The customer writesHow ERP Agent handles it
“6205 2RS C3”, “22212 EK”The designation is read whole: size, seals, clearance and bore. The numbers keep variants apart, so a 6206 drops down the list and the shielded version stays as an alternative.
“SPA 1500”, “8M-1200-30”Section, length and width are read from the line and compared with each candidate. A belt a few millimetres shorter is a different article and drops down.
“08B-1, 5 m box”, “19T sprocket”Pitch and the number of strands come from the designation; duplex chain is pushed down when the line says simplex.
A manufacturer’s part number off the worn partMatched against the manufacturer numbers stored beside your own codes, so the number on the part leads straight to your article.
Another brand’s designationMapped to your equivalent product family through your company’s cross-reference list, with the size taken from the line. The customer is offered the equivalent you stand behind.
The plant’s own stores numberLearned from the quote history you provide and the lines your team sends; kept on the line.
One code for a drive or service kitOnce the kit is defined for that customer, a customer-code set expands it into fixed catalogue lines.
A request in one language, your catalogue in anotherMatched across languages, with no translating first.

How ERP Agent handles a bearing and power transmission enquiry

Lines appear in the review table as soon as the agent has matched them.

  1. The enquiry arrives

    A rep forwards the email to your company’s own agent mailbox or drops the files into the web app. PDF (scanned too), Excel, CSV, Word, images and forwarded emails are read as they are. See email to ERP.

  2. Customer and site

    The agent identifies the customer from the request, finds them in your ERP’s customer register and flags it straight away if no customer matches. A delivery address that differs from the one on file, such as another plant in the group, is flagged too.

  3. Lines to products

    Wording your team confirmed before gets the same product again. Other lines are searched by designation, numbers and description; with sales history, what this customer actually buys comes forward.

  4. Checks

    Stated sizes and ratings are checked against each candidate. You can also switch on a second check that sends wrong matches back for another search and, with accessory rules set up for your company, reminds the rep of a taper bush for a pulley. The agent never guesses: a special it cannot place goes on your placeholder code, with the customer’s original line kept beside it.

  5. Pricing and approval

    Customer pricing comes from the data and rules configured for your company; once your ERP is connected, from its own price logic, customer discounts included. Once the rep approves, the quote or sales order is written to your ERP, CRM or other system.

Example: a breakdown list, line by line

Prices are left out; in a real draft they come from the pricing configured for your company.

Customer requestIllustrative example
Maintenance engineer’s email: “Line 2 conveyor is down. Can you price these today?”
  1. 22212 EK x 2
  2. H 312 sleeve x 2
  3. 6205 2RS C3 x 4
  4. SPA 1500 x 3
  5. 08B-1 chain, 5m box x 1
  6. Oil seal 35x52x7 viton x 2
  7. Our stores no. 114-0672 x 2
  8. Output shaft to sample x 1
Proposed lines · Illustrative example
Request lineProposed productQtyScoreWhy
22212 EK120-2212K Spherical roller bearing 22212 EK, tapered bore296Full designation matches
H 312 sleeve125-0312 Adapter sleeve H 312295Designation matches
6205 2RS C3110-6205 Deep groove ball bearing 6205-2RS C3497Sealed and C3 as written; the 2Z version is kept as an alternative
SPA 1500310-1500 Wedge belt SPA 1500393SPA 1482 and SPA 1507 drop down
08B-1 chain, 5m box410-0810 Roller chain 08B-1, 5 m box195Simplex as written; 08B-2 pushed down
Oil seal 35x52x7 viton520-3552 Shaft seal 35x52x7 FKM290“Viton” read as FKM; the NBR seal is kept as an alternative
Our stores no. 114-0672210-0207 Pillow block unit UCP 207298The plant’s own number, learned from an earlier quote
Output shaft to samplePlaceholder code, customer’s line kept10Made to a sample; marked for the rep to quote

Illustrative example: the request, article numbers and scores show how each kind of line is handled.

What the rep sees before anything is sent

  • The customer’s line beside the proposed product, so the rep checks instead of searching.
  • A match score from 0 to 100; lines under 80 are marked (how the match score works).
  • Reasoning and alternatives: read why a product was chosen, or take a runner-up such as the shielded bearing or the NBR seal.
  • Quote chat: add or remove rows and change quantities and prices, each edit approved or rejected line by line.
  • A person approves. The agent never sends anything to a customer on its own, and product codes are checked against the ERP first, so only codes that exist there are saved.
ERP Agent quote review interface with sample data
Quote review screen (sample data). Open full size

The brand fitted in the machine, and the brand you stock

Maintenance lists name whatever is stamped on the worn part. ERP Agent maps that brand’s product family to your equivalent family through the cross-reference list set up for your company, and takes the size from the line. The customer is offered the equivalent you choose to sell, and the rep makes the final call.

On a breakdown, the first correct answer wins

When a line is stopped, the plant phones or emails every supplier it has, and the order goes to whoever answers correctly first. ERP Agent prepares a typical request in 3–8 minutes, and fast mode handles requests of up to about 50 lines in 1–3 minutes, so the rep is checking a finished draft while competitors are still looking up the third line.

The agent learns from the lines your team sends: the next time that plant writes the same thing, it picks the same product. New inside-sales staff work from what experienced colleagues confirmed, and the knowledge of what each customer means by its own numbers stays in the company when people retire.

ERP Agent is live with steel, HVAC and fastener distributors. For mixed MRO lists, see industrial supplies distributors; for a test on your own enquiries, the AI quote agent pilot checklist.

Which ERP systems does it work with?

ERP Agent integrates with Business Central, SAP, NetSuite, Visma, IFS, Sage and any other ERP or CRM, and approved quotes and orders land in your ERP, CRM or other system. We set up the connection for your company during onboarding, and you can start with a catalogue file the same week. See how each connection works.

Integrations and what ERP Agent reads and writes in each
SystemTypeReadsWrites
Dynamics 365 Business CentralERP integrationItems, customers, customer pricesSales quotes and sales orders
SAP S/4HANAERP integrationProducts, business partners, customer pricesSales quotations and sales orders
SAP Business OneERP integrationItems, business partners, price listsSales quotations and sales orders
NetSuiteERP integrationItems, customers, customer pricesEstimates (quotes) and sales orders
Dynamics 365 Finance & Supply ChainERP integrationReleased products, customers, trade agreement pricesSales quotations and sales orders
VismaERP integrationItems, customers, customer pricesQuotes and sales orders
IFSERP integrationSales parts, customers, customer pricesSales quotations and customer orders
Monitor ERPERP integrationParts, customers, customer pricesQuotes and customer orders
Infor M3ERP integrationItems, customers, customer pricesQuotations and customer orders
ExactERP integrationItems, customers, sales pricesQuotations and sales orders
AFAS ProfitERP integrationItems, debtors, price agreementsQuotes and sales orders
OdooERP integrationProducts, customers, pricelistsQuotations and sales orders
SageERP integrationItems, customers, customer pricesSales quotes and sales orders
Epicor Prophet 21ERP integrationItems, customers, customer pricesQuotes and sales orders
Epicor EclipseERP integrationItems, customers, customer pricesBids and sales orders
Epicor KineticERP integrationParts, customers, price listsQuotes and sales orders
AcumaticaERP integrationItems, customers, customer pricesQuotes and sales orders
Infor CloudSuite DistributionERP integrationItems, customers, customer pricesQuotes and sales orders
Kerridge K8 / Klipboard ERP OneERP integrationItems, customers, customer pricesQuotes and sales orders
Intact iQ / GenetiQERP integrationItems, customers, customer pricesQuotes and sales orders
Dynamics NAVERP integrationItems, customers, customer pricesSales quotes and sales orders
SAP ECCERP integrationMaterials, customers, customer pricesSales quotations and sales orders
JeevesERP integrationItems, customers, customer pricesQuotes and sales orders; confirmed values on purchase orders
LemonsoftERP integrationItems, customers, customer pricesQuotes
Microsoft 365 / OutlookEmail integrationCustomer requests in the agent mailbox; email history for trainingNothing is sent to customers without your team
Catalogue file / SFTPFileProduct catalogue from a file, from the first weekThe reviewed quote or order as a file, ready to import into your system
Any other ERP or CRMERP or CRM integrationProducts, customers and prices, through the connection we set up for your company during onboardingQuotes and sales orders

ERP Agent in numbers

4–7 min
per line when a sales rep creates quotes and orders by hand, according to our case study
Over 95%
average automation across our customers
1–3 min
in fast mode, for requests of up to about 50 lines
0–100
match score on every line; under 80 is marked for review

Built to fit how a bearing and PT distributor already works

ERP Agent is the first agentic AI layer for wholesale distribution ERP systems. That design is what makes it quick to adopt:

  • No ERP replacement project. ERP Agent works on top of the ERP, CRM or other system you already run, and approved quotes and orders land there.
  • Your team stays in control. The agent prepares the draft and a rep approves it. Nothing reaches a customer without your team.
  • Start with a catalogue file. Load your catalogue, forward real maintenance lists the same week and connect your ERP when you are ready.
  • Nothing to map per customer. ERP Agent identifies the products from the customer’s own words and numbers, so a plant that emails for the first time is handled like your largest account.
  • EDI and email side by side. Accounts that order over EDI keep doing so; ERP Agent handles everyone else: the emails, PDFs, Excel lists and photos.
  • It gets better with every quote. Each line your team sends teaches the agent your customers’ shorthand and stores numbers.

The same workflow for other trades: industrial supplies and MRO, fastener distributors, cutting tool distributors and valves and fittings wholesalers. On the purchasing side, the agent also runs supplier order confirmation checks, comparing each confirmation with your purchase order line by line.

Frequently asked questions

What is quote automation for bearing and power transmission distributors?

Software that turns a customer’s enquiry into a draft quote from your own catalogue: bearings, belts, chain, sprockets and seals identified from the designations and sizes on each line, customer pricing applied, and the lines to check marked. A rep reviews the draft before it lands in your ERP, CRM or other system.

Can it tell bearing variants apart?

Yes. The numbers and suffixes on the line are compared with each candidate, so a different size drops down the list and close variants, such as the shielded version of a sealed bearing, are kept as alternatives the rep can take. Every line shows a match score and the agent’s reasoning.

Can it handle another manufacturer’s part number?

Yes. A manufacturer’s number is matched against the manufacturer numbers stored beside your own codes. Another brand’s designation is mapped to your equivalent product family through the cross-reference list set up for your company, and the rep makes the final call. See cross-reference.

Does it learn our customers’ own stores numbers?

Yes. It learns a customer’s codes from the quote history you provide and the lines your team sends, and keeps the code on the line. See customer part numbers.

How fast is it on a breakdown enquiry?

A typical request takes the agent 3–8 minutes. Fast mode handles requests of up to about 50 lines in 1–3 minutes, and lines appear in the table as they are matched. A shutdown list of several hundred lines takes about half an hour.

Will the draft carry our contract pricing?

Yes. With your ERP connected, prices come from the ERP’s own price logic, customer discounts included. Your team can review and edit every price before the quote goes out.

Does ERP Agent work with our ERP?

Yes. ERP Agent integrates with Business Central, SAP, NetSuite, Visma, IFS, Sage and any other ERP or CRM, including industry-specific packages. We set up the connection for your company during onboarding, and you can start with a catalogue file the same week. See ERP and email integrations.

Let’s look at your quote workflow

Bring a real breakdown list

Book a 30-minute call and bring a maintenance enquiry your team found slow to quote.

  • Your requests and product catalogue
  • Your pricing and review process
  • A clear scope for the next step
Lauri Pelkonen

Lauri Pelkonen

Founder & CEO

Book a 30-minute call Request a demo by email

Or use the address directly